Back to Contents Page
Installing The Heat Sink And Processor Assembly
1. Remove the processor from the antistatic packaging and place it into the socket.
2. Place the processor cover.
3. Push the release lever down and then press it inward to hold the retention hook that secures it.
4. Place the heat sink/fan assembly into the computer.
5. Tighten the four captive screws securing the heat sink/fan assembly to the system board.
6. Reconnect the heat sink/fan assembly cable from the system board.
7. Replace the
computer
8. Follow the procedures in
Related tasks
Removing The Heat Sink And Processor Assembly
cover.
After Working Inside Your
Computer.