Honda GXV 160 Owner's Manual page 5

3. FLYWHEEL BRAKE types:
Move the flywheel brake lever to the RELEASED position.
The engine switch, which is linked with the flywheel brake
lever, is turned on when the flywheel brake lever is moved to
the RELEASED position.
4. Pull the starter grip lightly until you feel resistance, then pull
briskly in the direction of the arrow as shown below. Return the
starter grip gently.
Direction to pull
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
5. If the control lever was moved to the CHOKE position to start
the engine, gradually move it to the MAX. or MIN. position as
the engine warms up.
CONTROL LEVER
CHOKE ROD types:
If the choke rod was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine
warms up.
CHOKE ROD
The control lever shown here will be connected to a remote control
on the equipment powered by this engine. Refer to the instructions
provided by the equipment manufacturer.
ENGAGED
RELEASED
FLYWHEEL BRAKE LEVER
STARTER GRIP
MIN. MAX.
CHOKE
OPEN
6. FLYWHEEL BRAKE types: Continue to hold the flywheel brake
lever in the RELEASED position. The engine will stop if you
move the flywheel brake lever to the ENGAGED position.
SETTING ENGINE SPEED
Position the control lever for the desired engine speed.
CONTROL LEVER
The control lever shown here will be connected to a remote control
on the equipment powered by this engine. Refer to the instructions
provided by the equipment manufacturer for remote control
information and engine speed recommendations.
ENGLISH
MIN.
MAX.
5