Connecting Numeric Keypad; Connecting A Ps/2 Mouse - Fujitsu b2178 Manual

SECTION 2

8. Connecting Numeric Keypad

Connecting a PS/2 mouse

This PC product supports connection of a PS/2 numeric keypad or other devices to the extended
keyboard/mouse connector on the connector box. This section explains the connecting
procedure of a numeric keypad.
1 Turn off the power to the PC.
2 Install the connector box.
3 Connect a numeric keypad.
Connect a numeric keypad to the extended keyboard/mouse connector on the connector
box. Connect it with the engraved arrow mark facing up.
Critical Point
When a mouse is connected to the numeric keypad mouse connector, the mouse connector
on the computer main unit cannot be used.
Mouse connector
A numeric keypad can be used only when your PC is in the Numeric keypad mode.
You can change the tilt angle of the numeric keypad by adjusting the tilt foot on the bottom
of it.
Other keyboards including 101, OADG, JIS, and Thumb Shift keyboards are supported for
connecting to the extended keyboard/mouse connector.
Extended keyboard/
mouse connector
55