Table of Contents
Advertisement
Troubleshooting
Problem
AE lock function
does not operate
Built-in Flash
does not
discharge
USB connection
with computer
does not work
properly*
USB connection
with printer does
not work properly
Shake
Reduction
does not work
Downloaded From camera-usermanual.com Samsung Manuals
244
Cause
AE lock is not
available when set to
(Auto),
(Bulb)
mode or
(Flash
X-synchro) mode.
When flash mode is
set to [Auto
discharge] or [Auto
Set flash mode to [Manual discharge] or [Manual
flash+Redeye
flash+Redeye reduct]. (p.70)
reduct], the flash will
not discharge if the
subject is bright
The transfer mode is
Set transfer mode to [Computer].
set to [Printer]
An error occurred
while sending USB
Change the transfer mode to [Printer].
data
The transfer mode is
Set transfer mode to [Printer]. (p.159)
set to [Computer]
Shake Reduction
Turn on the Shake Reduction switch.
function is off
Shake Reduction
If a lens for which focal length information cannot be
function is not set
acquired is used, set the [Focal Length] on the [
Properly
menu.
Shutter speed is too
low for Shake
Reduction function
to be effective
Turn off the Shake Reduction function and use a tripod.
when panning or
shooting night
scenes, etc.
Use AE lock with any setting other than
(Bulb) mode or
(Flash X-synchro) mode.
Remedy
(Auto),
OPS]
Advertisement
Table of Contents
