•
Connection
security: Scroll to
When connection security is on, the phone tries to use a secure connection with the WAP
service. If a secure connection is not available, the connection will not be made. If you wish to
connect anyway, with a non-secure connection, set the connection security to Off.
•
Bearer
(a connection method): Scroll to
connection speed, and other information, contact your network operator or service provider.
•
Service code
(shown if the bearer is USSD): Type in the code and press
•
Service number
and press
•
Dial-up number
•
IP address
(shown if the bearer is Data): Type in the address and press
•
Authentication type
(Select).
•
Data call type
(shown if the bearer is Data): Scroll to
•
User name
(shown if the bearer is Data): Type in the user name and press
•
Password
(shown if the bearer is Data): Type in the password and press
6. After you have made all the required settings, you can change the name of the setting set. Press
and then
(Options), scroll to Rename, and press
(OK).
The settings are now saved and you can make a connection to the WAP service.
74
©2002 Nokia Corporation. All rights reserved.
On
or Off, and press
(shown if the USSD address type is Service number): Type in the service number
(OK).
(shown if the bearer is Data): Type in the number and press
(shown if the bearer is Data): Scroll to
(Select).
USSD
or Data, and press
Secure
Analogue
(Select). Type in the name and press
(Select). For pricing, the
(OK).
(OK).
(OK).
or Normal, and press
or ISDN, and press
(OK).
(OK).
(Select).