TP-Link TL-WR841HP User Manual page 24

Disable Security - The wireless security function can be enabled or disabled. If

disabled, the wireless stations will be able to connect the router without encryption. It is
recommended strongly that you choose one of following options to enable security.
WPA/WPA2-Personal - Select WPA based on pre-shared passphrase.

PSK Password - You can enter ASCII or Hexadecimal characters.

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the
length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case
keys will affect the outcome. It would also be a good idea to write down the key and
all related wireless security settings.
No Change - If you chose this option, wireless security configuration will not change!

The above settings are only for basic wireless parameters. For advanced settings, please
check "More Advanced Wireless Settings", and then you can set the following parameters.
Mode - This field determines the wireless mode which the router works on.

Channel Width - Select any channel width from the pull-down list. The default setting is

automatic, which can adjust the channel width for your clients automatically.
Channel - This field determines which operating frequency will be used. The default

channel is set to Auto, so the AP will choose the best channel automatically. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point.
Click Next to continue.
6. Click the Finish button to complete the Quick Setup.
TL-WR841HP 300Mbps High Power Wireless N Router
Figure 3-13 Quick Setup – Finish
-18-