TP-Link TL-WR841HP User Manual page 23

5. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-12.
Wireless Radio - Enable or disable the wireless radio.

Wireless Network Name - Enter a string of up to 32 characters. The same name of

SSID (Service Set Identification) must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is set to be
TP-LINK_XXXX (XXXX indicates the last unique four numbers of each router's MAC
address). This value is case-sensitive. For example, TEST is NOT the same as test.
Region - Select your region from the pull-down list. This field specifies the region where

the wireless function of the router can be used. It may be illegal to use the wireless
function of the router in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for
assistance.

Note:
Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S. region
only.
TL-WR841HP 300Mbps High Power Wireless N Router
Figure 3-12 Quick Setup – Wireless
-17-