Installing Extra Memory - Brother HL-3040CN User Manual

Installing extra memory

Note
Always turn off the printer power switch before installing or removing the SO-DIMM.
a
Turn off the printer power switch, and then unplug the printer. Disconnect the interface cable from the
printer.
b
Remove the plastic (1) and then the metal (2) SO-DIMM covers.
c
Unpack the SO-DIMM and hold it by its edges.
CAUTION
To prevent damage to the printer from static electricity, DO NOT touch the memory chips or the board
surface.
Downloaded from ManualsPrinter.com Manuals
2
1
Option
4
4
100