Step1 Setting Up The Machine; Removing The Protective Parts; Loading Paper - Brother DCP-330C Quick Setup Manual

STEP1
Setting Up the Machine
1
1 Removing the protective
parts
1
Remove the protective tape and film covering
the scanner glass.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
4
2

Loading paper

You can load up to 100 sheets of 80 g/m
(20 lb) paper.
For details, see Acceptable paper and other
media in Chapter 2 of the User's Guide.
1
Pull the paper tray completely out of the
machine and lift the output paper tray cover (1).
1
2
Press and slide the paper side guides (1) and
paper length guide (2) to fit the paper size.
2
1
2