Honda Goldwing GL1800/A Owner's Manual page 190

Installation
1. Reassemble the removed parts in the reverse order of removal.
2. Install the bolts and tighten to the specified torque:
axle bolt:
right caliper fixing bolts:
left caliper socket bolts:
3. Measure the clearance between the brake disc and the caliper holder on each
side with a 0.028 in (0.7 mm) feeler gauge.
Downloaded from www.Manualslib.com
Position the wheel between the fork legs and insert the front axle shaft
from the left side, through the left fork leg and wheel hub.
Align the index line of the axle shaft with the recessed surface of the fork
leg.
Fit the brake disc carefully between the brake pads to avoid damaging the
pads.
43 lbf·ft (59 N·m , 6.0 kgf·m)
23 lbf·ft (31 N·m , 3.2 kgf·m)
23 lbf·ft (31 N·m , 3.2 kgf·m)
If the feeler gauge inserts easily, remove it and tighten the axle pinch bolts
to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
If the feeler gauge cannot be inserted easily, loosen the left axle pinch bolt
and pull the left fork outward or push inward to adjust the clearance. Then
tighten the axle pinch bolts to the specified torque.
manuals search engine
If You Have a Flat Tire
recessed surtace
Taking Care of the Unexpected
axle shaft
index line
183