Honda Goldwing GL1800/A Owner's Manual page 138

Install a New Oil Filter:
6. Remove the oil filter with a filter wrench and let the remaining oil drain out.
Discard the oil filter in an approved manner (page
7. Pour the drained oil into a suitable container and dispose of it in an approved
manner (page
Improper disposal of drained f luids is harmf ul to the environment.
8. Apply a thin coat of engine oil to the rubber seal of a new oil filter.
LEFT FRONT, UNDER ENGINE
9. Install the new oil filter and tighten it by hand.
10. Using an oil filter wrench attachment and a torque wrench, tighten the new oil
filter to the specified torque:
19 lbf·ft (25 N·m , 2.6 kgf·m)
11. Check the condition of the sealing washer on the drain bolt. Replace the
washer every other time the oil is changed.
Install the drain bolt and tighten it to the specified torque:
25 lbf·ft (34 N·m , 3.5 kgf·m)
Downloaded from www.Manualslib.com
171 ).
oil filter
manuals search engine
Engine Oil & Filter
171 ).
rubber
seal
oil filter
Servicing Your Honda
131