D-Link DCS-6517 User Manual page 69

Configuration
Media Settings
Click Add to open the Media Settings page. On this page, you can specify the type
of media that will be sent when a trigger is activated. A total of 5 media settings can
be configured.
6517
Media name: Enter a name for the media setting.
Media Type: There are three choices of media types available: Snapshot, Video Clip,
and System log. Select the item to display the detailed configuration options. You
can configure either one or all of them.
Snapshot: Select to send snapshots when a trigger is activated.
Source: Select to take snapshots from stream 1 ~ 4.
Send pre-event images: The camera has a buffer area. It temporarily holds data up
to a certain limit. Enter a number to decide how many images to capture before a
trigger is activated. Up to 7 images can be generated.
Send post-event images: Enter a number to decide how many images to capture
after a trigger is activated. Up to 7 images can be generated.
File name prefix: Enter the text that will be appended to the front of the file name.
Add date and time suffix to the file name: Select this option to add a date/time
suffix to the file name.
Click Save to enable the settings, then click Close to exit the page.
Video clip: Select to send video clips when a trigger is activated.
Source: Select a source of video clip.
D-Link DCS-6517 User Manual 69