Interval Timer - Nokia 2865 User Manual

O r g a n i z e r
2. Enter the time (in hh:mm:ss format), and select OK.
3. Enter a note for the timer, and select Start.
and the timer (in hh:mm:ss format) appear in the standby mode when the
countdown timer is running.
When the time runs out, your phone sounds an alarm, vibrates, and flashes its
lights. If you are in standby mode, select
standby mode, press any key during the alarm to stop the timer.
After 60 seconds the timer alert expires automatically. Select
end key to clear the timer note.
To change the time:
1. Select Menu > Organizer
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note, and select Start.
To stop the timer before the alarm sounds, select
Stop timer.

Interval timer

The interval timer in your device allows you to store multiple interval timers. You
can define and store up to 10 timing periods for each interval timer. Once at least
one interval timer is set and stored, you can select the interval timer and one of
the stored intervals for that timer. When the selected interval expires, your phone
sounds an alarm, vibrates, and flashes its lights.
To set an interval timer, do the following:
1. Select Menu > Organizer
2. Select Add new timer. This option only appears if you have already created an
interval timer.
3. Enter a name for the timer, and select Save.
4. Enter a name for the first timer period, and select Save.
5. Enter the desired time interval, and select OK.
6. Select an existing stored period and
Start timer.
To use an interval timer:
90
Restart or Exit. If you are not in the
> Timer > Change time.
Menu
> Timer > Interval timer.
Edit period,
Exit or press the
> Organizer > Timer
Add period, Delete period, or
>