Intended Use; Technical Data; Declaration Of Conformity - Bosch GSR 14,4 VE-2-LI Original Instructions Manual

OBJ_BUCH-1237-001.book Page 15 Tuesday, July 27, 2010 4:18 PM
Symbol Meaning
Metal
Ø Drilling diameter, max.
Chuck clamping range
L Sound power level
wA
K Uncertainty
Delivery Scope
Cordless screwdriver/Combination cordless
drill.
Battery, application tools and other accessories
shown or described are not part of the standard
delivery scope.
A complete overview of accessories can be
found in our accessories program.

Intended Use

The machine is intended for driving in and loos-
ening screws as well as for drilling in wood, met-
al, ceramics and plastic. GSB machines are ad-
ditionally intended for impact drilling in bricks,
brickwork and masonry.

Technical Data

The technical data of the machine are listed in
the Table on page 216–217.
Please observe the article number on the type
plate of your machine. The trade names of the
individual machines may vary.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 2006/42/EC.
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Bosch Power Tools
Symbol Meaning
Wood
Ø Max. screw dia.
Weight according to
EPTA-Procedure 01/2003
L Sound pressure level
pA
a Vibrational emission value
h
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
18.05.2010
Noise/Vibration Information
The measured values of the machine are listed
in the table on page 216–217.
Noise and vibrational values (vector sum of
three directions) determined according to
EN 60745.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
2 609 140 752 | (27.7.10)
English | 15