Maintenance And Cleaning; Optional Accessories - Bosch PKS 54 CE Operating Instructions Manual

PKS 54/66 Euro - Buch Seite 7 Dienstag, 17. Juni 2003 9:13 09
The guide rail 27 must not extend over
F
the work piece side to be sawed.
– Apply the circular saw and make sure that the
guide adapter 26 is sitting firmly.
– Guide the circular saw across the material,
pushing lightly at a constant pressure.
Note: Using the joining piece 28 (accessory)
two guide rails can be joined together. Clamping
is effected by means of the four screws located in
the joining piece.

Maintenance and Cleaning

Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and the ventilation slots clean.
The swinging protective guard must always be
able to move freely and close on its own accord.
Therefore, always keep the area around the
swinging protective guard clean. Remove dust
and chips by blowing out with compressed air or
with a brush.
If the machine should fail despite the rigorous
manufacturing and testing procedures, repair
should be carried out by an authorised after-sales
service centre for Bosch power tools.
Saw blades that are not coated can be protected
against corrosion with a thin coat of acid-free oil.
Before use, the oil must be removed again, oth-
erwise the wood will become soiled.
Resin and glue residue on the saw blade produce
poor cuts. Therefore, clean the saw blade imme-
diately after use.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the machine.
20 • 1 609 929 B67 • 03.06
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2 wire cable.
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine it must be
disposed of safely.

Optional accessories

26 Guide adapter
27 Guide rail (1.4 m long)
Guide rail (0.7 m long)
28 Connection piece
29 Screw clamps, pair
30 Dust bag with adapter
Further accessory information is available at your
Bosch dealer.
English - 7
To be fitted
by qualified
professional only
2 607 001 375
2 602 317 031
2 602 317 030
1 602 319 003
1 607 960 008
1 605 411 029