Mute While Telephoning; Radio Mode; Switching To Radio Mode; Selecting The Frequency Band / Memory Bank - Blaupunkt Lexington C32 Operating And Installation Instructions

ADJUSTING THE VOLUME
"MUTE" appears in the display.
Setting the mute level
You can set the unit's mute volume
level.
Press the MENU button 8.
➮
➮
Keep pressing the
8 until "MUTE LVL" appears in
the display.
➮
Set the mute level using the
buttons 8.
When you have fi nished making your
changes,
press the MENU button 8 twice.
➮

Mute while telephoning

If your unit is connected to a mobile
telephone, the car radio's volume will
be muted as soon as you "pick up" the
telephone. "TEL CALL" fl ashes in the
display.
This requires to the mobile telephone
be connected to the car radio as de-
scribed in the installation instructions.
The volume will be reduced to the
confi gured mute volume level.
8
01_BA_LexStLouisC32_GB.indd Abs1:8 01_BA_LexStLouisC32_GB.indd Abs1:8

Radio mode

Switching to radio mode

If you are in CC or CD changer mode
(CD changer only with the Lexington
C32),
keep pressing the SOURCE 9
➮
or button
button until the radio mode ap-
pears in the display together with
the memory bank and frequency.
and
Selecting the frequency band /
memory bank
This unit can receive programs broad-
cast over the FM and AM frequency
band. There are three preset memory
bank for the FM range and one for the
AM range. Six stations can be stored
on each memory bank.
Selecting the FM memory bank
To switch between the FM memory
bank FM1, FM2 and FMT,
press the BAND/TS button =.
➮
Selecting the AM waveband
To select the AM waveband,
➮
keep pressing the BAND/TS but-
ton = until AM appears in the
display.
RADIO MODE
23.01.2007 12:19:19 Uhr 23.01.2007 12:19:19 Uhr