Yamaha SRT-700 Owner's Manual page 15

5
Teach the unit the "Volume (–)" code of the TV's remote control.
5-1 Press VOLUME (–) on the front panel of the unit.
5-2 While pointing your TV's remote control at the remote control sensor, hold
down the volume (–) key for more than 1 second twice or three times.
Result Bleep/buzzer Indicators
Successfully
Once
learned
Failed to learn
* Repeat from Twice
Step 5-1.
6
Teach the unit the "Volume (+)" code of the TV's remote control.
6-1 Press VOLUME (+) on the front panel of the unit.
6-2 While pointing your TV's remote control at the remote control sensor, hold
down the volume (+) key for more than 1 second twice or three times.
Result Bleep/buzzer Indicators
Successfully
Once
learned
Failed to learn
* Repeat from Twice
Step 6-1.
Lights up
Flash
Lights up
Flash
7
Teach the unit the "Power" code of the TV's remote control.
7-1 Press (power) on the front panel of the unit.
7-2 While pointing your TV's remote control at the remote control sensor, hold
down the power key for more than 1 second twice or three times.
Result Bleep/buzzer Indicators
Successfully
Once
learned
Failed to learn
* Repeat from Twice
Step 7-1.
8
To finish the learning mode, press the LEARN key on the unit's
remote control.
This completes the necessary settings. Now you can operate the unit with the TV's
remote control's mute key, volume keys, or power key.
HINT
• The learning mode will be finished automatically if no operations are performed for 5 minutes.
• Set the TV volume to minimum. When you turn up the volume of the unit with the TV's remote
control, the volume of the TV may be turned up at the same time. In this case, follow Step 3 in
"Connections" (p.6) to change the TV setting.
• You can press the (power) key on the unit's remote control to finish learning mode.
For cable or satellite set top box users:
Once you have completed the setting with the original TV's remote control, you can use the cable or
satellite set top box's remote control to operate the unit.
Lights up
Flash
13