Connecting Your Monitor - Iiyama ProLite T2451MTS User Manual

CONNECTING YOUR MONITOR

Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor (Main Power Switch and Power Switch) and computer.
NOTE
 The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.
If a special cable is required please contact your local iiyama dealer or regional iiyama
offi ce.
 For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
 Make sure you tighten the fi nger screws at each end of the signal cable.
[Example of Connection]
Power Cable
(Accessory)
6 BEFORE YOU OPERATE THE MONITOR
<Back>
DVI-D Signal Cable (Accessory)
D-Sub Signal Cable (Accessory)
Audio Cable (Accessory)
HDMI Cable
(Not included)
AV Equipment etc.
HDMI Cable
(Not included)
USB Cable (Accessory)
GAME
Equipment
etc.
Computer