Using Power Over Ethernet - D-Link DWL-2200AP Install Manual

Using Power over Ethernet

Step 1: Connect one end of an Ethernet cable (included with your package)
to the LAN port on the DWL-2200AP and the other end of the Ethernet cable
to the port labeled P+DATA OUT on the PoE base unit.
Step 2: Connect another Ethernet cable from the DATA IN port on the PoE
base unit to your router/switch or to a PC.
Step 3: Attach the power adapter to the connector labeled POWER IN on
the PoE base unit. Attach the power cord to the power adapter and into an
electrical outlet.
15