Specifying the Audio Data Input/Output
1
Click the Windows Start button. Click Settings, and select Control
Panel. Then in Control Panel, double-click Multimedia.
The Multimedia Properties dialog box will appear.
2
Click the Audio tab.
3
In Playback, click the
appears, click 1:Roland UA-100 Wave 1.
4
In Recording, click the
appears, click 1:Roland UA-100 Wave.
fig.04-18.e
5
Click OK to complete the settings.
This completes settings for the Windows standard MIDI output and audio
input/output devices. If you now wish to make settings for your sequencer soft-
ware, you will need to refer to the owner's manual for your software.
24
Destination.
for Preferred device, and in the list that
for Preferred device, and in the list that