Tools needed for installation
Proper installation is the owner's responsibility.
HOWEVER, SERVICE CALLS PERFORMED AS A RESULT OF POOR SET-UP, ADJUSTMENT, AND CONNECTION ARE THE
RESPONSIBILITY OF THE INSTALLER.
Make sure you have everything necessary for proper installation.
1. GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements.
2. POWER CORD for electric dryers (except Canada).
3. GAS LINES (if a gas dryer) must meet national and local codes.
4. EXHAUST SYSTEM – must be rigid metal or fl exible stiffwalled metal exhaust ducting.
See Exhaust Requirements.
Control
panel
Adjustable
Door
Adjustable leg
Pliers
Cutting knife
Pipe wrench
Nut drivers
(gas only)
Level
Screwdriver
Duct tape
Crescent
(standard)
spanner
1-6