Setup - D-Link dnr-312l User Manual

Section 3 - Configuration Interface
From the Menu Bar, click the Setup icon (
your connection to the Internet.
DHCP: Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be automatically
updated to your NVR.
Static IP: You may obtain a static or fixed IP address and other network
information from your network administrator for your NVR. A static IP
address will simplify access to your NVR in the future.
IP Address: The fixed (static) IP address.
Subnet Mask: The default value of 255.255.255.0 is used to determine if the
destination is in the same subnet.
Gateway: The gateway forwards frames to destinations in a different subnet.
Invalid gateway settings may cause the failure of transmissions to a
different subnet.
DNS1: Primary domain name server that translates names to IP addresses.
DNS2: Secondary domain name server to backup the primary server.
Enable Enable this setting if your ISP (DSL service) is using PPPoE. Enter a User
PPPoE Name and Password. You may already have a username and password
provided by your ISP. If not, contact your ISP to obtain them. (The
connection status will be determined automatically by the system.)
DHCP server: Check the box to Enable DHCP Server. If your network doesn't have a
DHCP server, you can enable this feature for easier local network setup.
D-Link DNR-312L User Manual

Setup

Network Setup
) > Network > Network Setup. The Network Setup section allows you to set up
35