Setting The Time; Setting The Search Area - GMC Navigation System 2006 Yukon Manual

Setting the Time

To set the time, do the following:
1. Press the power/volume knob to turn the system on.
2. Press the CONFIG hard key.
3. Touch the Clock screen button.
4. Touch the appropriate Time Zone screen button.
5. Touch the Daylight Savings screen button.
The time is now set. Touch the Manual Adjust screen
button if you need to further adjust the time. The radio
will use the GPS satellite to set the time. The vehicle
needs to be in an open area to receive the signal.
See Global Positioning System (GPS) on page 2-35 for
more information.
Entering an Address, Point of Interest,
Home, and Preset Destinations
Before entering an Address, Point of Interest, Home, or
Preset Destination, select the appropriate search
area that contains the final destination. Your vehicle
must be stopped to perform this operation.
1-6

Setting the Search Area

To set the search area, do the following:
1. Press the power/volume knob to turn the system on.
2. Insert the DVD map disc into the CD slot.
3. A notice may appear. Touch the NEXT screen
button to proceed.
If the radio is already on with a map disc inserted,
push the NAV hard key.
4. Touch the DEST screen button.
5. Touch the Change screen button.
6. Touch the appropriate Search Area numbered
screen button that contains your final destination.
The system will return to the Destination menu.