Setting The Clock; Storing Radio Station Presets; Setting Search Area/Entering Address; Storing Preset Destinations - GMC Yukon User Manual

2008 full-size truck navigation
Hide thumbs Also See for Yukon:
Table of Contents

Advertisement

Storing Radio Station Presets

To set preset radio stations, do the following:
1. Press the
O
(power) knob to turn the system on.
2. Press the AUDIO hard key and select the desired
band (AM, FM1, FM2, XM1, or XM2 (if equipped)).
f
3. Use the
(tune) knob or the SEEK arrows to tune
to the desired station.
4. Press and hold one of the five preset screen
buttons, at the bottom of the screen, until you hear a
beep or see the station displayed on the selected
preset button.
5. Repeat the steps for each preset.
See "Storing Radio Station Presets" under Navigation
Audio System on page 3-2 for more information.

Setting the Clock

To set the time, do the following:
1. Press the clock touch screen button located in the
upper right corner of the screen.
2. Press the Set screen button.
3. Press the Hours and Minutes − (minus) and + (plus)
signs to decrease and to increase the time. See
"Setting the Clock" under Configure Menu on
page 2-29 for more information.
Setting the Search Area, Entering an
Address and Point of Interest, and

Storing Preset Destinations

Before entering an Address, Point of Interest, Home, or
Preset Destination, select the appropriate region that
contains the final destination. Your vehicle must
be in PARK (P) to perform this operation.
Setting the Search Area
To set the search area, do the following:
1. If the radio is already on with a map disc inserted,
skip to Step 5.
2. Press the
O
(power) knob to turn the system on.
3. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 2-4 for more
information.
4. A caution may appear. Touch the OK screen button
to proceed.
5. Press the DEST hard key.
6. Press the Change Search Area screen button.
7. Select the appropriate region numbered screen
button that contains your final destination.
8. Press the Back screen button to return to the
Destination Entry menu. See Destination on
page 2-14 for more information.
1-7

Advertisement

Table of Contents
loading

Table of Contents