Connecting Microphones And Accessories; Mains Connection - AKG DMM 12BC User Instructions

Installation and Connection

Connecting microphones and accessories

Mains connection

ATTENTION
50
Before connecting, read the operating instructions for your microphones and accessories.
NOTE
Connect microphones and accessories to the back of the DMM 12BC:
1) Connect microphones and other signal sources (e.g. wireless microphone receivers) to
the "IN" input channels.
2) Connect the "OUT - L" and "OUT - R" output channels to a mixing desk or amplifier.
3) Connect the RCA jacks on the stereo recording output "REC (OUT)" to a recording device.
Do not connect the unit to the mains power supply until you have established all the audio
connections!
1) Connect the mains power supply cable to the appropriate socket on the rear panel of the
DMM 12BC.
2) Plug the power supply cable into a mains socket.
DMM 12BC