Electronic Parking Brake - Subaru 2016 WRX Quick Reference Manual

While Operating
Hill Holder
(if equipped)
To activate, press the Hill Holder switch.
To deactivate, press the Hill Holder switch
again. When the Hill Holder function
is activated, the parking brake will be
automatically applied when stopped
on an uphill or downhill slope with
the brake pedal pushed in. The brake
system warning light on the instrument
panel and the indicator light on the
parking brake switch will illuminate.
20
Function
™

Electronic Parking Brake

(if equipped)
To apply, push the brake pedal and pull
up the parking brake switch. The brake
system warning light on the instrument
panel and the indicator light on the
parking brake switch will illuminate.
To release, make sure all doors are
closed and your seatbelt is fastened,
then gently push the accelerator pedal.
Or, while the ignition switch is in the ON
position and the brake pedal is pushed
in, push down the parking brake switch.