Rear Seat Entertainment System; Universal Home Remote - GMC 2006 Yukon Getting To Know Your

turn-by-turn instructions for reaching
your destination. In addition, the system
can help you locate banks, airports,
restaurants, post offices, ATMs and
more.
See your Owner Manual or Navigation
Entertainment System Quick Reference
Guide for operating instructions.
See Section 3 of your Owner Manual.

Rear Seat Entertainment System

(if equipped)
The DVD Rear Seat Entertainment
(RSE) system includes a DVD player
and a video display screen (located in
the overhead console), two sets of wire-
less headphones and a remote control.
To play a DVD:
• The ignition must be in the Run or
Accessory position, or RAP (Retained
Accessory Power, available after the
ignition is turned off) must be active.
• Push forward on the release latch to
fold down the video screen.
• Insert a DVD into the loading slot;
it will automatically start.
• If a DVD is already loaded, press the
Play/Pause button.
• Press the CD/AUX button on the
radio until RSE appears on the radio
display to listen to the DVD through
your vehicle speakers.
• When using the wireless head-
phones, turn the headphones on and
adjust the volume using the volume
knob.
To stop or eject a DVD:
• To stop playing a DVD, press the
Stop button. Press the Play button to
resume viewing. If the Stop button is
pressed twice, the DVD will resume
viewing at the beginning.
• To eject a DVD, press the Eject but-
ton on the DVD player.
See Section 3 of your Owner Manual.

Universal Home Remote

(if equipped)
Program the Universal Home Remote
1. Determine which of the three chan-
nels (buttons) you want to program
for functions such as a garage door
opener, gate opener or entry door
locks.
2. Press and hold the desired remote
button through step 3.
3. When the remote light blinks slowly
(within 30 seconds), hold your trans-
mitter/opener 1" to 3" from the remote
buttons. Then hold your transmitter
button on until the remote light flash-
es rapidly (up to 90 seconds). The
process is now complete.
Note: If your transmitter has a "rolling
code" feature, this process may not
work. Please refer to your Owner
Manual.
See Section 2 of your Owner Manual.
9