Installation Of Decorative Panel - Panasonic CS-ME9PB4EA Service Manual

11.8 INSTALLATION OF DECORATIVE PANEL

The decorative panel has its installation direction. Confirm the direction by displaying the piping side.
1 Remove the air inlet grille by moving the catchers to center.
2 Fitting the decorative panel
Temporarily secure the fixing screws (3 pcs.) before fitting the decorative panel. (For temporarily
o
securing the front grille.)
Place decorative panel on the screws (3 pcs.) before fitting, move decorative panel as illustrated and
o
tighten all the screws (4 pcs.).
Check before hand the height from the ceiling to
the unit.
The front grille fitting direction is determined by
the unit direction.
Only use the screws with the length of 35mm
which is provided, to fix the decorative panel.
Do not use other screw which is longer it may
cause damage to the drain-pan and other
components.
3 Fit the decorative panel and ceiling wall together and confirm no gap in between. Readjust indoor unit height,
if there is a gap between ceiling wall and decorative panel.
41