Presetting Channels - Sony slv-688hf Operating Instruction

Presetting
channels
(Skip this section if you are
using cable box/DSS
receiver control.)
This VCR is capable of receiving VHF
channels 2 to 13, UHF channels 14 to 69
and unscrambled CATV channels 1 to
125. First, we recommend that you
preset the receivable channels in your
area using automatic presetting. Then, if
there are any unwanted channels,
disable them manually. If you have
decided which channels you wish to
preset, set them directly using manual
presetting.
Before you start...
• Turn on the VCR and the TV.
• Set the TV to the VCR channel (channel 3 or 4). If your TV is
connected to the VCR using A/V connections, set the TV to video
input.
• Press TV/VIDEO to display the VIDEO indicator in the VCR's
display window.
Presetting all receivable channels automatically
1
• MENU
PLAY
OK
2
PLAY
OK
36
Getting Started
Press MENU, then press >/. to move the
cursor (z) to TUNER PRESET and press
OK.
When using the EASY SET UP procedure,
skip this step.
Press >/. to select ANTENNA/CABLE.
MENU
OK
>/./?//
TUNER PRESET CH1
ANTENNA / CABLE ANT • CABLE
AUTO PRESET
MANUAL SET • ADD ERASE
AFT • ON OFF
FINE TUNING