Hitachi 50VF820 Service Manual page 25

Lamp Replacement
6. Without installing the lamp cover, the power will be off and the Lamp Indicator will flash (see page 16). Be sure
to install the lamp cover by re-engaging the two clips and tighten the screws before turning the power on,
otherwise it may cause unusual colors.
NOTE: If power is connected before the Lamp Cover is installed, the power will be off and the Lamp Indicator
will flash (see page 16).
7. Plug power cord into AC outlet and turn on the main power switch.
NOTE: This product contains lead and a lamp that contains mercury. Dispose of this product and its lamp in
accordance with applicable environmental laws. For lamp recycling and disposal information, go to
www.lamprecycle.org. For product recycling and disposal information, contact your local government
agency or eRecycle.org (in California), the Electronic Industries Alliance at www.eiae.org (in the US) or
Electronic Product Stewardship Canada atwww.epsc.ca (in Canada).
For more information, call "1-800-Hitachi".
GENERAL INFORMATION
PHILLIPS HEAD
SCREW DRIVER
25
LAMP COMPARTMENT
120V
Lamp
Temp
Power
LC58/LC58E