Panasonic PV-C2522-K Operating Instructions Manual page 9

*Important: If a remote control button does not work when pressed,
lay)
press the COMBO button on the remote and try the button again.
Manual Clock Set
If AUTO CLOCK SET was incomplete, manually
set the clock as follows.
1
Press ACTION on the Remote to
display SET CLOCK Menu screen.
2
Press
and press
manner, select and set the date,
year, time, and DST. (Daylight
Saving Time)
3
Press ACTION twice to start
CLOCK and exit.
POWER
ACTION
SET CLOCK
: :
1 / / 1 / /
DST : ON
SEL L E E C C T T M M O O N N TH SE TH
SELECT :
SET :
END : ACT I ON
to select the month
to set. In the same
SET CLOCK
: :
2 / 6/ 2 / 6/ 2002 WED 2002 WED 12 12 00 00PM PM
DST : ON
SET T COMPLETED SE COMPLETED
SET :
START : ACT I ON
SELECT/SET
:CH UP
:CH DOWN
:VOL UP
:VOL DOWN
Reset all unit Memory Functions
When moving unit to a new location, or if a
mistake was made in the Initial Setup section.
• Make sure a tape is not inserted in the unit.
1
Turn the unit
Power on.
2
Press and hold both PLAY and
FF on the unit for more than 5
seconds.
• The power will shut off.
• Please ignore "NO CASSETTE" warning.
3
Do "Initial Setup" on page 8.
9