Table of Contents
Advertisement
Location of Controls
Light Tower™ Illuminated Remote Control
LIGHT button:
When LIGHT is pressed, available buttons in the selected mode light up, and the selected mode
button (COMBO or DSS CABLE) flashes for 5 seconds. If no button is pressed, light goes out in 5
seconds to conserve batteries. Also, by holding down a button, you can confirm the selected mode
(mode button will flash) in the dark.
EJECT button:
When EJECT is pressed, the tape is ejected from Cassette
Compartment. If EJECT is pressed during recording, the
unit will not respond to the command.
EJECT
Ejects tape.
POWER
Turn unit on or off.
FM/TV
Receives FM radio signal.
MUTE
Mutes the sound instantly.
CHANNEL UP/DOWN
Selects a channel.
SELECT UP/DOWN
Control navigation around
on-screen menu.
ACTION
Displays Main Menu.
NUMBER Keys
Selects a channel directly.
REWIND/SEARCH
Rewinds tape, and searches
reverse scene.
PLAY
Begins playback.
PAUSE/SLOW
Pauses for slow motion
and frame advance picture.
SLEEP
Turns off the unit automatically
CM SKIP/ZERO SEARCH
In Stop mode, goes to the
counter "0:00:00." In Play mode
skips over 1 to 3 minutes of tape
NITE
Colour and picture intensity lev
adjusted during night time use.
SPEED
Selects recording speed.
STOP
Stops recording or playback.
6
el are
COMBO
Returns to COMBO mode.
LIGHT
See above.
DSS/CABLE
Sets the remote to control some
basic DDS or Cable box
functions.
RAPID TUNE
Displays the last channel
you were watching.
VOLUME UP/DOWN
Adjusts volume.
SET/BACK SPACE
Sets a selected menu, or goes
back to correct.
PROGRAM
Displays SET PROGRAM screen.
You can set Timer Program and
On-Timer.
TRACKING UP/DOWN
Reduces picture noise during
Playback and Slow Motion.
ADD/DELETE
Adds or deletes a channel.
FAST FORWARDS/
SEARCH
Fast forwards tape, and searches
forward scene.
DISPLAY/ENTER
Displays the VCR status and
clock.
In DSS or CABLE mode, it may be
necessary after channel selection.
TAPE POSITION
Finds out present tape position
and amount of tape remaining.
REC
Records the program.
SEARCH
Goes directly to the desired
recording. Locates end point of
recording.
COUNTER RESET
Resets to "0:00:00" at
the desired position.
Advertisement
Table of Contents
