Sony RDR-HX715 Service Manual page 21

QQ
3 7 63 1515 0
5
Press </, to make a selection, and press
ENTER.
The cursor moves to "done."
6
Press ENTER again to exit the Panel Menu.
To play a title
List View
Select a program using M/m, and press ENTER.
Playback starts.
To make adjustments, press MENU while the
program is selected and select one of the
following.
• "play from beginning"
• "delete episode"
Group View
1
Select a program using M/m, and press
ENTER.
The episodes appear.
2 Select an episode using M/m, and press
ENTER.
Playback starts.
To delete all episodes, press MENU while the
program is selected and select "delete all
episodes."
b
Notes
• The program titles in the Title List and the TV Guide
On Screen may not match.
• Information not written on the disc may also appear in
the RECORDINGS screen.
• If you press TV GUIDE while making play list settings,
the play list currently being set is canceled.
• JPEG image files and MP3 audio tracks do not appear
in the TV Guide On Screen.
TE
L 13942296513
60
Buttons
(fast reverse/fast forward)
(slow, freeze frame)
+ + RW RW -RW
HDD VR
-RW + R - R
Video
*
DVD VCD
* Playback direction only
X PAUSE
To resume normal playback, press H PLAY.
b
Notes
• To enjoy the TVS function, set "Digital Out" to "On"
and "Dolby Digital" to "D-PCM" in "Audio" setup.
• The volume may be reduced when surround effects are
set.
• When the playback signal does not contain a signal for
the rear speakers, the surround effects will be difficult
to hear.
In addition, the surround effects may also be difficult to
hear depending on the title being played and the
environment where the recorder is being used.
• When you select one of the surround modes, turn off
the surround settings of the connected TV or amplifier
(receiver).
• Make sure that your listening position is between and
at an equal distance from your speakers, and that the
speakers are located in similar surroundings.
• Angles and subtitles cannot be changed with titles
recorded on this recorder.
• 96 kHz PCM audio and DTS audio do not have
surround effects.
• The surround effects do not work while performing
playback quickly with sound.
www
To playback quickly with sound (Scan Audio)
When you press M during playback of a title
recorded in the HDD, you can play quickly with
dialogue or sound ("x1.5" appears).
No sound is output when you press M two or
more times to change search speed.
.
62
http://www.xiaoyu163.com
Operations
Fast reverses/fast forwards the disc when pressed during playback.
Search speed changes as follows:
fast reverse fast forward
m1 T t 1M
*1
m2 T T t t 2M
m3 T T T t t t 3M
*2 *2
When you press and hold the button, fast forward/fast reverse continues at the
selected speed until you release the button.
M
*1
When you press once during playback of a title recorded in the HDD, you
can play quickly with sound ("x1.5" appears).
m M
*2
3 and 3 are only available for the HDD and DVDs.
Plays in slow motion when pressed for more than one second in pause mode.
Plays one frame at a time when pressed briefly in pause mode.
Pauses playback.
To resume playback from the point where you
stopped (Resume Play)
When you press H PLAY again after you stop
playback, the recorder resumes playback from the
point where you pressed x STOP.
To start from the beginning, press TOOLS to
select "Play Beginning," and press ENTER.
Playback starts from the beginning of the title/
track/scene.
The point where you stopped playing is cleared
when:
– you open the disc tray (except for HDD).
– you play another title (except for HDD).
– you switch the Title List menu to Original or
Playlist (HDD/DVD-RW in VR mode only).
– you edit the title after stopping playback.
– you change the settings on the recorder.
– you turn off the recorder (VIDEO CD/CD/
DATA DVD/DATA CD only).
– you make a recording (except for HDD/DVD-
RWs in VR mode).
– you switch between JPEG and MP3.
x ao u163
y
b
Note
You cannot resume playback during TV Pause.
i
http://www.xiaoyu163.com
2 9
8
Playback options
To check the position of the buttons below, see the illustration on page 59.
Buttons
AUDIO
-RW
HDD DVD
VR
VCD CD
SUBTITLE
DVD
ANGLE
DVD
SUR (surround)
+ -RW -RW
RW VR
Video
+ R -
R DVD
PROGRESSIVE
+ + -RW
HDD RW RW VR
+ -
-RW R R
Video
DVD
VCD
REPLAY/ADVANCE
(instant replay/instant
advance)
HDD + RW -RW
VR
-RW + R - R
Video
DVD
. PREV/NEXT >
Q Q
3 6 7 1 3 1 5
To use the DVD's Menu
When you play a DVD VIDEO, or a finalized
DVD+RW, DVD-RW (Video mode), DVD+R, or
DVD-R, you can display the disc's menu by
pressing TOP MENU or MENU.
To play VIDEO CDs with PBC functions
PBC (Playback Control) allows you to play
VIDEO CDs interactively using the menu on your
TV screen.
When you start playing a VIDEO CD with PBC
functions, the menu appears.
Select an item using the number buttons and press
ENTER. Then, follow the instructions in the menu
(press H PLAY when "Press SELECT"
appears).
The PBC function of Super VIDEO CDs does not
work with this recorder. Super VIDEO CDs are
played in continuous play mode only.
To play restricted DVDs (Parental Control)
If you play a restricted DVD, the message "Do
you want temporarily change parental control to
*?" appears on your TV screen.
1
Select "OK" and press ENTER.
The display for entering your password
appears.
2
Enter your four-digit password using the
number buttons.
3
Press ENTER to select "OK."
The recorder starts playback.
To register or change the password, see "Parental
Control (DVD VIDEO only)" on page 96.
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent children from
ejecting the disc.
When the recorder is turned on, hold down
x STOP until "LOCKED" appears in the front
panel display. The Z OPEN/CLOSE button does
not work while the Child Lock is set.
To unlock the disc tray, hold down x STOP until
"UNLOCKED" appears in the front panel display
when the recorder is turned on.
co
z Hints
H
• You can also use the PLAY button in step 3
(page 59) to start playback.
• Even if you select "Factory Setup" in "Options" setup .
(page 99), the Child Lock remains set.
1-15
9 4 2 8
Operations
Selects one of the audio tracks recorded on the disc when pressed repeatedly.
DVD : Selects the language.
HDD -RW : Selects the main or sub sound.
VR
: Selects stereo or monaural audio tracks.
VCD CD
Selects a subtitle language when pressed repeatedly.
Selects an angle when pressed repeatedly.
If various angles (multi-angles) for a scene are recorded on the disc, "
appears in the front panel display.
Selects one of the TVS effects when pressed repeatedly.
TVS* (TV Virtual Surround) lets you enjoy virtual surround sound effects
created from the front left and right speakers. The selected setting is displayed
in the front panel display for a few seconds.
"TVS OFF": No surround effect
"TVS DYNAMIC": Creates one set of virtual rear speakers.
"TVS WIDE": Creates five sets of virtual rear speakers.
"TVS NIGHT": Creates five sets of virtual rear speakers. Effective at low
volume.
"TVS STANDARD": Creates three sets of virtual rear speakers. Effective
when you use two separate front speakers.
* TVS was developed by Sony to produce home surround sound with just a stereo
TV.
Switches the type of video output signal to interlace or progressive format
(page 19).
Replays the scene/briefly fast forwards the scene.
Goes to the beginning of the previous/next title/chapter/scene/track.
For the HDD, you cannot go to the beginning of the previous/next title.
0 5 8 2 9 9 4 2 8
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs, excessive noise will
be heard from the analog stereo jacks. To avoid
possible damage to the audio system, the consumer
should take proper precautions when the analog stereo
jacks of the recorder are connected to an amplification
system. To enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must be
connected to the digital jack of the recorder.
• Set the sound to "Stereo" using the AUDIO button
when you play DTS sound tracks on a CD (page 61).
Notes on playing DVDs with a DTS sound track
DTS audio signals are output only through the DIGITAL
OUT (COAXIAL or OPTICAL) jack.
When you play a DVD with DTS sound tracks, set
"DTS" to "On" in "Audio" setup (page 95).
Adjusting the picture quality
HDD + RW -RW -RW
VR
Video
DVD VCD
1
Press TOOLS during playback to select
"Video Settings," and press ENTER.
Video Settings
Select the item you want to change.
Y NR :
C NR :
BNR :
MNR :
DVE :
PB Video Equalizer
2
Select an item, and press ENTER.
The adjustment display appears.
"Y NR" (luminance noise reduction):
Reduces noise contained in the luminance
element of the video signal.
"C NR" (chroma noise reduction): Reduces
noise contained in the color element of the
video signal.
"BNR" (block noise reduction): Reduces
m
"block noise" or mosaic like patterns in the
picture.
"MNR" (mosquito noise reduction): Reduces
the faint noise appearing around the outlines
of the images. The noise reduction effects are
automatically adjusted within each setting
range according to the video bit rate and other
factors.
"DVE" (digital video enhancer): Sharpens the
outlines of the images.
9 9
"
9 9
,continued
61
+ R - R
2
2
2
1
Off
,continued
63