Portamento Control (54H); High Resolution Velocity Prefix (58H); Reverb Send (5Bh) - Casio PX-760 Manual

8.16

Portamento Control (54H)

Format
Message Format:
n:
kk:
Send This message is not sent by this Instrument.
Receive Receipt of this message first stores the Source Note Number for the next note. When the
next Note On is received, the portamento effect is applied to the note using this Source Note Number as
the pitch start point and the Note On event key number as the end point. If there already is a note being
sounded by Source Note Number at this time, the new note on is not performed and the portamento
effect is applied to the pitch of the note being sounded. That is to say that legato play is performed.
8.17 High Resolution Velocity Prefix (58H)
Format
Message Format:
n:
vv:
Send Sends the lower seven bits of 14-bit Velocity when a key is pressed or released. (Note1)
Receive Receipt is handled, in combination with the following Note On/Off message, as the lower
seven bits of 14-bit Velocity. (Note1)
For information about the relationship between the Note On/Off message and High Resolution Ve-
locity Prefix message, see "4.3 Instrument Velocity Resolution".
:
Note1 The PX-760,AP-260,PX-160 do not support Note Off Velocity. For these models, Velocity for send Note Off
messages is a fixed value (40H). Velocity for receive Note Off messages is ignored. The High Resolution Velocity Prefix message is
not sent or received for a Note Off message.
8.18

Reverb Send (5BH)

Format
Message Format:
n:
vv:
Send This message is not sent by this Instrument.
Receive Receipt changes Reverb Send.
BnH 54H vvH
MIDI Channel Number
Source Note Number
BnH 58H vvH
MIDI Channel Number
Value
BnH 5BH vvH
MIDI Channel Number
Value
16