Denon AVR-X2200W Model Information page 18

Integrated network av receiver

Hide thumbs Also See for AVR-X2200W:

Owner's manual (290 pages)

Service manual (185 pages)

Quick start manual (13 pages)

Table Of Contents

Table of Contents

Upgrades/Updates

Firmware:

This unit has the ability to update its firmware over the internet if so is selected by the user. When connected to a network via Wi-Fi or Ethernet, the AVR

searches automatically for new updates and if any is found, a message appears on the screen for approx. 40 seconds with the options of updating the

firmware: "NOW", "LATER", or "IGNORE". Note: This feature of displaying the update message, can be disable from the "Setup" menu

(Setup/General/Firmware/Notifications/Update or Upgrade/Off).

If the update process is interrupted, "Update retry" appears on the display and the unit tries repeatedly to continue the update until it either reconnects and

picks up where it left off and continue the update process or times itself out after trying several times. When the latter occurs, one of the following messages

will appear on the screen.

Connection fail

Download fail

Updating fail

Server is busy

To Check for Firmware Update from the Denon server when the unit is connected to the internet via the Ethernet port (When Firmware Notification is

turned off).

Press "SETUP" and select "GENERAL" and then select "FIRMWARE" followed by "UPDATE" and finally, select "CHECK FOR UPDATE".

Note: This will also check the time it will approximately take to complete the update.

To download the latest version of firmware for AVR-X2200W, click on the following Upgrade page:

www.usa.denon.com/US/Downloads/Pages/Product-Updates.aspx

To display the AVR's current firmware version on the TV screen: