Nikon COOLPIX S9 User Manual page 79

5
Disconnect the camera once transfer is complete.
If the USB option is set to [PTP]
Turn the camera off and disconnect the USB cable.
If the USB option is set to [Mass storage]
Remove the camera from the system as described below before turning the
camera off and disconnecting the USB cable.
Windows XP Home Edition/Windows XP Professional
Click the [Safely Remove Hardware] icon (
remove USB Mass Storage Device] from the menu displayed.
Windows 2000 Professional
Click the [Unplug or Eject Hardware] icon (
USB Mass Storage Device] from the menu displayed.
Macintosh
Drag the untitled camera volume ("NO NAME") to the Trash.
j
Connecting the USB Cable
• When connecting the USB cable, be sure that the connectors are oriented correctly. Do not
use force when connecting the USB cable. When disconnecting the USB cable, do not pull
the connector at an angle.
• Do not pinch the connector cover between the camera's USB connector and the USB cable
connector when connecting the cable to the camera.
l
Marking Pictures for Transfer
Pictures marked for transfer are recognized by the E icon dis-
played during playback. As the default setting, all pictures are
automatically marked for transfer. Two options control transfer
marking:
• [Interface] > [Auto transfer] in the setup menu: Choose [On]
to mark all new pictures for transfer (c 106).
• [Transfer marking] in the playback menu: Change marking
for existing pictures (c 92).
Connecting to a Computer
) in the taskbar and select [Safely
) in the taskbar and select [Stop
10.10.2006 10.10.2006 10.10.2006
15:30 15:30 15:30
E E
c
100NIKON 100NIKON 100NIKON
0005.JPG 0005.JPG 0005.JPG
M M
N O O
4 4 4 4
67