Connecting The Camera And Printer - Nikon COOLPIX L6 Owner's Manual

Connecting the Camera and Printer

1
Set the USB option (c 63) to [PTP].
2
Turn the camera off.
3
Turn the printer on.
• Check printer settings.
4
Connect the USB cable as shown below.
5
Turn the camera on.
• The PictBridge start-up screen (
in the camera monitor. The camera will then enter
full-frame playback with the PictBridge logo dis-
played in the top left corner of the monitor (
PictBridge
j
Connecting the USB Cable
• When connecting the USB cable, be sure that the connectors are oriented correctly. Do not
use force when connecting the USB cable. When disconnecting the USB cable, do not pull
the connector at an angle.
• Do not pinch the connector cover between the camera's USB connector and the USB cable
connector when connecting the cable to the camera.
Connecting to a Printer
) will be displayed
).
: :
OK
4/ 4/ 4/ 4 4
USB
PTP
Mass storage
MENU
Exit
67