Http://Www.xiaoyu163.Com - Sony STR-DA2100ES Service Manual

STR-DA2100ES
QQ
3 7 63 1515 0
Pin No. Pin Name
92 NO USE
93 PCM1609 RST
94 FLASH_A
95 FLASH_B
96 FLASH_C
97 VCC
98 VSS
99 EEPROM.SDA
100 EEPROM.SCL
101 VSS
102 9718.HCLK
103 HDIN
104 HDOUT
105 CLK
106 DAT
107 LAT
108 ON/OFF
109 SOT1
110 SIN1
111 UPCON_CLK
112 DIN/F1
TE
113 L 13942296513 LAT/F2
114 CLK
DRV.CLR/
115
BLUE LED
116 VOL_IC.DATA
117 VOL_IC.CLK
118 NO USE
119 A_D
120
SYSTEM_MUTE
121 BST_SEL
122 VCC
DA2 to DA0
123 to 125
126 DAVS
127 DAVC
128 AVCC
129 AVRH
130 AVRL
131 AVSS
AD0 to AD2
132 to 134
135 MODEL
136 AREA
www
NO USED
137 to 139
140 VCC2
141 BACKUP
.
142 X0A
60

http://www.xiaoyu163.com

I/O
O Read data output from the digital audio interface receiver
O System reset signal output to the D/A converter
- Not used
- Not used
- Not used
- Power supply terminal (+3.3V)
- Ground terminal
I/O Two-way data bus with the EEPROM
O Serial data transfer clock signal output to the EEPROM
- Ground terminal
O Serial data transfer clock signal output to the DSP
O Serial data output to the DSP
I Serial data input from the DSP
O Serial data transfer clock signal output to the OSD driver
O Serial data output to the OSD driver
O Serial data latch pulse signal output to the OSD driver
O OSD power supply on/off switch signal output terminal
O Serial data output to the RS-232C
I Serial data input from the RS-232C
O Serial data transfer clock signal output to the chroma decoder
O Serial data output to the FL driver
O Serial data latch pulse output to the FL driver
O Serial data transfer clock signal output to the FL driver
O Clear signal output to the FL driver
O Serial data output to the electrical volume
O Serial data transfer clock signal output to the electrical volume
- Not used
O Analog/digital selection signal output terminal
O System muting on/off control signal output terminal "H": muting on
O Signal selection signal output terminal "L": boot strap signal, "H": L/R sampling clock signal
- Power supply terminal (+3.3V)
- Not used
- Ground terminal (for D/A converter)
- Power supply terminal (+3.3V) (for D/A converter)
- Power supply terminal (+3.3V) (for A/D converter)
- Reference voltage (+3.3V) input terminal (for A/D converter)
- Reference voltage (0V) input terminal (for A/D converter)
- Ground terminal (for A/D converter)
I Front panel key input terminal (A/D input)
I Destination setting terminal
I Destination setting terminal
- Not used
- Power supply terminal (+3.3V)
x ao
y
- Power supply terminal (+3.3V) (for back up)
i
I
Sub system clock input terminal Not used
http://www.xiaoyu163.com
8
Description
Q Q
3 6 7 1 3
u163
.
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
9 9
2 8 9 9