Panasonic A14 Quick Start Manual page 13

Network Dome Camera Quick Operation Guide
Fix the mounting base to the ceiling with screws.
Adjust the surveillance angel.
Loosen the tilt adjusting screws, and adjust the tilt angel [0~65], and
tighten the tilt adjusting screws.
Hold the black liner and rotate it to adjust the pan position [0~360].
Remove the black liner and rotate the camera to adjust the azimuth
angle [0~360].
Figure 2-4 Fix the Mounting Base
Figure 2-5 3-axis Adjustment
12
Tilt Adjusting Screw