Peripherals - Gigabyte GA-990FX User Manual

To cancel the password, press <Enter> on the password item and when requested for the password, enter
the correct one first. When prompted for a new password, press <Enter> without entering any password.
Press <Enter> again when prompted to confirm.
NOTE: Before setting the User Password, be sure to set the Administrator Password first.
2-5

Peripherals

& Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card.
Sets the PCI Express graphics card on the PCIEX16_1 slot as the first display. (Default)
PCIe 1 Slot
Sets the PCI Express graphics card on the PCIEX16_2 slot as the first display.
PCIe 2 Slot
Sets the PCI Express graphics card on the PCIEX4 slot as the first display.
PCIe 3 Slot
& Audio LED
Enables or disables the onboard audio LED function.
Disables this function.
Off
Still Mode The LEDs stay constantly on. (Default)
The brightness of the LED changes according to the music rhythm.
Beat Mode
The brightness of the LED changes slowly and smoothly like breath.
Pulse Mode
& OnChip SATA Controller
Enables or disables the integrated SATA controllers. (Default: Enabled)
& OnChip SATA Type
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
Native IDE Configures the SATA controller to IDE mode.
RAID Enables RAID for the SATA controller.
AHCI C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
- 28 -