Aprilaire 8400 series Installation Instructions Manual page 13

SETUp & TESTINg
SYSTEm SETUp INSTRUCTIONS
System setting
00 Equipment type (8466, 8448) (Set by Sw1)
01 Temperature scale
02 Fan control in heating
03 Offset for internal sensor
04 Auto mode
05 Remote sensor
06 Compressor minimum off time
07 Heating minimum off time
61000652A 8400 Tstat Install.indd 13
(CONTINUED)
Setting range, default in bold
0 : heat/cool
1 : heat pump
0 : fahrenheit
1 : Celsius
0 : gas or oil furnace (Equipment controls fan)
1 : Electric (Thermostat controls fan)
0° : No offset applied
–4°F to +4°F (–2°C to +2°C)
0 : Auto mode is disabled
1 : Auto mode is enabled
0 : No remote sensor attached
1 : Remote sensor attached
5 minutes
1 to 5 minutes in 1 minute steps
2 minutes
1 to 5 minutes
13
7/23/09 2:20:58 PM