Prepare And Route Water Line - Whirlpool GU2800XTV Manual

2
Direct Wire–Prepare hole
Wood
cabinet
Wood cabinet: Sand hole until smooth.
Metal cabinet: Cover hole with grommet
(not provided).
3
Direct Wire–Route cable
Route cable from power supply through cabinet
hole (cable must extend to the right front side of
cabinet opening). Tape cable to the floor in area
shown. This will prevent cable from moving when
dishwasher is moved into cabinet opening.

Prepare and Route Water Line

Helpful Tip: Routing the water line through
the left side of cabinet opening will make water
connection easier.
1
Metal
cabinet
Preferred locations Preferred locations
1/2"
(1.3 cm)
Drill a 1/2" (1.3 cm) hole in the cabinet side or
rear.
2
Measure overall length of copper tubing or
flexible braided water supply line. Attach to the
hot water line using a connection configura-
tion that is in compliance with local codes and
ordinances. The water line to the dishwasher
should have a manual shutoff valve.
2-9
Drill hole
Measure water supply line
Optional locations Optional locations
Hot water line