Insert The Memory Card - Nikon COOLPIX 4300 User Manual

Alternative Power Sources
In addition to the rechargeable Nikon EN-EL1
Lithium-ion battery included with your camera, the
COOLPIX4300 can be used with non-rechargeable
2CR5 (DL245) lithium batteries, available at a variety
of retail outlets. To power your camera continuously
for extended periods, use an EH-21 AC
adapter/battery charger or EH-53 AC adapter (both
available separately).
The Clock Battery
The camera's internal clock-calendar is powered by a separate, rechargeable
power source, which is charged as necessary when the main battery is installed
or the camera powered by an AC adapter (available separately). After charging
for about ten hours, this power source can provide roughly ten hours of back-
up power. If the main battery has been removed for an extended period, or
removed before charging is complete, a flashing
monitor, indicating that the clock needs to be reset.
Step 3—Insert the Memory Card
Your Nikon digital camera uses CompactFlash™ (CF) memory cards to
store pictures (p. 133).
1 Turn the camera off
18
Connecting AC adapter
to COOLPIX4300
DC-in connector
icon may appear in the
2

Insert the memory card

Terminals
Front
label
Direction
of insertion
Insert card terminals first with
front label facing camera back
Removing Memory Cards
Memory cards can be removed without loss of data when
the camera is off. To remove memory cards, turn the camera
off and open the card-slot cover
to partially eject the card and then remove the card by
hand.
• Slide the card-slot cover out
flip it open . Hold the card with the
arrow (s) facing towards you and insert
it in the direction of the arrow
it in until it is firmly in place and the
eject button pops up. Close the card
slot cover .
. Press the eject button
and
, sliding
19