Sony cmt-bx50bt Operating Instructions Manual page 26

CD/MP3 player
The sound skips, or the disc will not
play.
 Wipe the disc clean, and replace it.
 Move the system to a location away
from vibration (for example, on top of
a stable stand).
 Move the speakers away from the
system, or place them on separate
stands. At high volume, speaker
vibration may cause the sound to skip.
Play does not start from the first
track.
 Press PLAY MODE
both "PGM" and "SHUF" disappear to
return to normal play.
Starting playback takes more time
than usual.
 The following discs take a longer time
to start playback.
 a disc recorded with a complicated
tree structure.
 a disc recorded in multisession
mode.
 a disc that has not been finalized (a
disc to which data can be added).
 a disc that has many folders.

GB

repeatedly until
Bluetooth device
Pairing cannot be done.
 Move the Bluetooth device closer to
the system.
 Pairing may not be possible if other
Bluetooth devices are present around
the system. In this case, turn off the
other Bluetooth devices.
 Enter the same passkey that was
entered at the Bluetooth device
correctly.
Connection is not possible.
 The Bluetooth device you attempted
to connect does not support the A2DP
profile, and cannot be connected with
the system.
 Enable the Bluetooth function of the
Bluetooth device.
 Establish a connection from the
Bluetooth device.
 The pairing registration information
has been erased. Perform the pairing
operation again.
 While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.
 Erase the pairing registration
information of a Bluetooth device and
perform the pairing operation again.