HP StoreOnce 4900 Backup Installation And Configuration Manual page 54

Domain Name: uk.mycompany.net
Gateway: 172.1.1.1
VLAN tag:
Port Set: portset_3 with these interfaces: eth2 eth3
Encryption Links:
Bonding Mode: 6 (Active Load Balance Bonding)
Is this configuration correct?
1 = Yes (default)
2 = No
-->1
<--Configuration okay: Yes
-------------------------------------------------------------
If you have added all subnets, then you may proceed: you will
then be shown a summary of the configuration and be given the
option to validate it, and then a further option to apply it.
Otherwise, you may continue to add further subnets.
-------------------------------------------------------------
Do you want to configure another subnet?
1 = No (default)
2 = Yes - on a new physical port set
3 = Yes - a new subnet on a new VLAN on the same physical port set
-->1
<--Another subnet: No
---------------------------------------------------------------------
If you specify at least one network gateway, then you must choose a
default network; the default network must have an associated gateway.
If you do not specify any network gateways, then you may not choose a
default network.
---------------------------------------------------------------------
Select a default network (The default network shall be used as the default gateway subnet) :
1 = subnet_1 (default)
2 = subnet_2
3 = subnet_3
-->2
<--Default Subnet: subnet_3
4. You have now configured all available ports. The wizard now asks you to confirm your settings
and will validate and automatically activate this configuration for you if you confirm the settings
are correct and there are no errors.
*Step Complete* Do you want to :
1 = Go to next step: Step 3) (default)
2 = Go back to previous step: Step 1)
3 = Go back to start of present step: Step 2)
4 = Quit wizard and lose all settings
-->1
<--Navigation: Go to next step: Step 3)
Step 3) Save and apply all network settings
-------------------------------------------
----------------------
Network Name: net_wizard
Network Description: Created by wizard on: Wed Apr 30 15:26:40 2014
Write Protected: no
DNS Servers: 172.1.1.100 172.1.2.100
Port Sets: portset_1 portset_2 portset_3
----------------------
Number of Networks: 3
Number of VLANs configured: 1 out of possible 128
----------------------
Network: subnet_1
----------------------
IP Addresses: dhcp
Net Mask: dhcp
Domain Name: dhcp
54 Network configuration, how to use StoreOnce CLI commands