Advertisement
a-3. Be sure to stick the Angle Seat(supplied) onto
the Angle-A.
Caution: When the left and right pan limit screws
should be removed from the pan/tilt unit due
to the Angle-A installation, use the Angle Seat
as shown below.
Cut here when using
the Angle-A (normal)
Angle seat (supplied)
Cut here when using
the Angle-A (180° reversal)
b. Mounting of the Angle-B (supplied)
b-1. Remove the mounting adaptor of the camera
by removing the two mounting adaptor fixing
screws.
b-2. Fix the Angle-B onto the camera by using the
two Angle Fixing Screws (supplied) as shown
in the following.
Angle Fixing Screws (supplied)
-7-
Mounting Adaptor
Angle-B (supplied)
Advertisement
