Support; Software Upgrade; Contact Samsung - Samsung BD-C6900 User Manual

Hide thumbs Also See for BD-C6900:
Table of Contents

Advertisement

Setup

Support

Software Upgrade

This menu allows you to upgrade software for
performance improvements or additional services.
You can check the current software version,
upgrade using the Internet and set the Auto
upgrade notification. If the product is properly
connected to the network by cable or wirelessly,
the product automatically connects to Samsung's
website each time it is turned on and downloads
update files if any valid upgrade exists.
Settings
Display
Software Upgrade
Audio
Disc Menu
System
Audio
Current Version
Network
Subtitle
By Internet
Language
Auto Upgrade Notification : On
Security
General
> Move " Select ' Return
Support
1.
To select By Internet, press the 确认 button.
A popup message will appear if an update is
available, asking if you want to upgrade.
2.
If you select Yes, the product turns off
automatically, restarts and then begins the
upgrade. (Do not turn it on manually here.)
3.
The update progress popup will appear.
When the update is complete, the product
turns off again automatically.
4.
Press the 电源 button to turn on the product.
NOTE
The Update is complete when the product turns off
after restarting. Press the 电源 button to turn on
the updated product for your use.
Never turn the product off or on manually during the
update process.
Samsung Electronics shall take no legal responsibility
for product malfunction caused an unstable internet
connection or consumer negligence during software
upgrade.
You can also update software in any of the two

English
:
:
: XXX-XXXXXXXXX \
:
ways as follows: Software update is the same as
in the By Internet menu.
USB : Visit www.samsung.com/bluraysupport,
then download and store the latest software
(RUF file) onto a USB flash drive. Connect the
USB flash drive to the USB port of the product
(the disc tray must be empty) to update the
software, then follow the on-screen instructions.
CD/DVD : Visit www.samsung.com/
bluraysupport, download and write the latest
software (RUF file) onto a disc. Insert and play
the disc in the product to start the update, then
follow the on-screen instructions.
NOTE
Software upgrades using the USB Host jack must be
performed with no disc inside.
If you want to cancel the upgrade in the process
of downloading the upgrade data, press the 确认
button.
When the system upgrade is done, check the
software details in the software Upgrade menu.
Do not turn off the product during the System
Upgrade. It may cause the product not to work
properly.
Software upgrades using the USB Host jack must be
performed with a USB memory flash stick only.

Contact Samsung

Provide contact information for assistance with
your product.

Advertisement

Table of Contents
loading

Table of Contents