Support; Networks And The Internet; Configuring Your Network Connection - Samsung UBD-M7500 Full Manual

Support

Software Update
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
Reset Smart Hub
Resets all Smart Hub settings to their default
settings. To use, you must enter the security PIN.
The default security PIN is 0000.
Reset
Resets all settings to their default settings except
for the network and Smart Hub settings, and then
starts the Setup function. To use, you must enter
the security PIN. The default security PIN is 0000.
Remote Management
When activated, lets Samsung Call Center
agents diagnose and fix problems with this player
remotely. Requires an active Internet connection.
| NOTES |
\ Remote Management service might not be
available in some countries.
\ To use Remote Management:
1) Call the Samsung Contact Center and ask
for remote support.
2) Open the player's menu on your TV and
go to the Support section.
3) Select Remote Management, and then
read and agree to the service agreements.
When the PIN screen appears, provide the
PIN number to the agent.
4) The agent accesses this player.
About This Device
Provides contact information for assistance with
your product.
Terms & Policy
You must review and agree to both the App Terms
& Conditions and the privacy policy to use App
services.

Networks and the Internet

When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE,
and upgrade the product's software through
the network connection. For more information
about accessing and using Internet services, see
the Network Services chapter of this manual on
pages 33~40. Instructions for configuring the
network connection start below.

Configuring Your Network Connection

Before you begin, determine if your IP address
is static or dynamic. (Most are dynamic.) If it is
dynamic, and you have a wired network, we
recommend using the Automatic configuration
procedures described below.
You must connect the product to your router using
a LAN cable before you start the configuration
procedure.
| NOTE |
Use Quick Settings > Network on the Home
screen to simplify the network configuration
process.
To begin configuring your network connection,
follow these steps:
Wired Network
Wired - Automatic
Ğ
1. In the Home screen, select Settings, and
then press the
2. Select General, and then press the
button.
3. Select Network, and then press the
button.
4. Select Network Settings, and then press the
(OK) button.
5. Select Wired in the Network Type screen,
and then press the
21
English
(OK) button.
(OK)
(OK)
(OK) button.