Table of Contents
Advertisement
1 Brake hose holder
2
2 Hexagon socket bolt
2
1 Brake hose cover
1
2 Collar
1
3 Collar
1
4 Flange bolt
1
5 Plain Washer
1
6 Flange bolt
1
EAA00030
4. FRONT BRAKE HOSE
A: Remove the front fork cover
B:
NOTE:
D Align the top (d) of the brake
D Pass the brake hose in front
D Make sure that brake hose
C: Tighten the brake hose holder
D: Slide the front fork cover to its
E: Tighten the front fork cover
V
V
d=6 (0.24), l=14 (0.55)
EAA00031
5. BRAKE HOSE COVER
A: Tighten the bolts to specifica-
V
V
d=8 (0.31)
V
d=6 (0.24)
V
d=8 (0.31), l=20 (0.79)
V
d=8 (0.31)
V
d=6 (0.24), l=12 (0.47)
- 6 -
HOLDER
bolts to slide the front fork
cover upwards.
hose neck with the brake
hose holder bottom (c).
of the axle boss (a), then fit it
into the brake hose groove (b).
does not contact the front
axle nut.
bolts to specification.
Bolt:
10 Nm (1.0 mdkg, 7.2 ftdlb)
original position.
bolts to specification.
Bolt:
10 Nm (1.0 mdkg, 7.2 ftdlb)
tion.
Bolt (M8):
16 Nm (1.6 mdkg, 11 ftdlb)
Bolt (M6):
7 Nm (0.7 mdkg, 5.1 ftdlb)
Hide quick links:
Advertisement
Table of Contents
