Understanding Bluetooth Access Settings - Motorola CLUTCH I465 User Manual

Connecting to a Stored Device
If you have previously connected to a device, the
device will be stored on your phone so you can
connect with it easily.
Press /
1.
> Bluetooth > Link to Devices
select a device.
2.
If prompted to bond with the device, press
softkey).
3.
If prompted, enter the Bluetooth PIN and press
(left softkey). Your phone will connect to the device.
Using Bluetooth During a Call
During a call, you can connect with available Bluetooth
devices.
Note If the Hands Free menu contains only one device,
then your phone will automatically try to connect to
that device.
To use Bluetooth during a call:
While in a call, press /
1.
2. Select a device.
134 11. Bluetooth
and then
Yes (left
Ok
.
> Use Bluetooth
Disconnecting From a Device
Press /
1.
> Bluetooth > Link to Devices
2.
Press (left softkey) and then press
Drop
softkey).
Note Pressing No (right softkey) when prompted exits the
menu without disconnecting the device.

Understanding Bluetooth Access Settings

A Bluetooth device can have either
security access. The first time a Bluetooth device
connects to your Motorola Clutch i465 phone, you must
grant the device permission to connect. You can then
change the access setting of the device to either
or .
Automatic Ask
If you set a device to
Automatic
automatically to your phone when it is in range. If you
set a device to , that device must request
Ask
permission before it can connect to your phone.
Devices are automatically granted permission during
the ten seconds after connecting.
.
(left
Yes
or
Automatic Ask
, that device can connect